HDPE is a non-polar thermoplastic resin with high crystallinity. The appearance of the original HDPE is milky white, and the thin section is translucent to a certain extent. PE has excellent resistance to most domestic and industrial chemicals. Certain types of chemicals can cause chemical corrosion, such as corrosive oxidants (concentrated nitric acid), aromatic hydrocarbons (xylene) and halogenated hydrocarbons (carbon tetrachloride). The polymer is non-hygroscopic and has good water vapor resistance, and can be used for packaging purposes. HDPE has good electrical properties, especially the high dielectric strength of the insulation, making it very suitable for wires and cables. Medium to high molecular weight grades have excellent impact resistance, even at room temperature and even at low temperatures of -40F.
PE can be manufactured in a wide range of different processing methods. Including such as sheet extrusion, film extrusion, pipe or profile extrusion, blow molding, injection molding and rotational molding.
Extrusion: The grade used for extrusion production generally has a melt index less than 1 and a medium to wide MWD. During processing, low MI can obtain suitable melt strength. Wider MWD grades are more suitable for extrusion because they have higher production speeds, lower die pressures and reduced melt fracture tendency.
PE has many uses, such as wires, cables, hoses, pipes and profiles. Pipe applications range from small-section yellow pipes for natural gas to thick-walled black pipes with a diameter of 48in for industrial and urban pipelines. The use of large-diameter hollow-wall pipes as a substitute for rainwater drainage pipes made of concrete and other sewer pipes is growing rapidly.
