As we all know, the safety of PE gas pipe construction is the prerequisite for the survival and development of every enterprise. Therefore, safety is very important. For PE gas pipe construction enterprises, it is more difficult to achieve safe production, because the safe production of construction projects is different from other industries: First, there are many high-altitude operations. In traditional gas transmission and distribution design, steel pipes and cast iron pipes occupy a very large proportion of urban gas pipelines. However, with the passage of time, metal pipes have disadvantages such as poor corrosion resistance, unchanged transportation and installation, and high cost.
Among the workers currently working on the construction site, migrant workers account for about 60%-80%, and in some construction sites it is as high as 95%. These characteristics determine that the construction process of a construction project is a production process that is dangerous, sudden, and prone to casualties. Therefore, with the increase in the business volume of construction projects undertaken by enterprises, it is important to do a good job of safety management at the construction site to ensure the safe production of construction projects. The burial depth of the PE gas pipeline should be in accordance with the "Code for Construction and Acceptance of Urban Gas Transmission and Distribution Engineering" and "Technical Specification for Polyethylene Gas Pipeline Engineering", which stipulate that: when laying under a paddy field, the depth is not less than 0.8m; when laying on a non-travel lane , The depth is not less than 0.6m; when laying on the traffic lane, the depth is not less than 0.9m.
Because the PE gas pipeline has good flexibility and particularly good bending performance, tensile stress will be generated on the outside of the pipe during bending transition, and compressive stress will be generated in the internal measurement of the pipe. Creep damage will be formed when it exceeds a certain limit, so This problem should be avoided as much as possible during the construction process.
In addition, PE gas pipelines cannot pass through lengths containing corrosive liquids, explosive or flammable liquids, cannot pass through the bottom of large structures or buildings, and cannot be in the same trench with cables and other pipelines. Special protection measures must be taken when crossing under conditions. When laying facilities for PE gas pipelines, not only should it meet the relevant requirements for laying of metal gas pipelines, but it should also be installed according to the characteristics of the PE pipe itself.
Because the strength of PE gas pipes is lower than that of metal pipes, the external load of PE pipes must be controlled during installation work. According to the national standard "Classification of Work at Height", more than 90% of building construction is work at height;
Second, there are many outdoor operations on PE gas pipes. The open-air operation of PE gas pipes accounts for about 70% of the entire workload, and is affected and harmed by natural conditions such as spring, summer, autumn, and winter, as well as strong sunlight, wind, rain, ice, snow, and lightning;
The third is manual labor and heavy manual labor. Most types of work in the construction industry are still manual operations, which are prone to fatigue, distraction, and many misoperations, leading to accidents. Fourth, there are many grade separation operations. The structure of building products is complex, the construction period is tight, multiple units and multiple types of work cooperate with each other, and the three-dimensional cross construction. If the management is not good, the connection is improper, and the protection is not strict, it may cause mutual harm.
