PPR pipe fittings heat preservation and energy saving, better heat resistance

May 17, 2021

Leave a message

Green PPR pipe fittings are also called type three polypropylene pipe fittings, which are made of random copolymer polypropylene through extrusion and injection into pipe fittings. It is a new type of plastic pipe product developed and applied in Europe in the early 90s. In the late 1980s, PPR adopted a gas phase copolymerization process to make about 5% of PE randomly and uniformly polymerized in the molecular chain of PP (random copolymerization) to become a new generation of pipeline materials. It has good impact resistance and long-term creep performance.

In addition to the characteristics of general plastic pipes such as light weight, corrosion resistance, non-scaling, and long service life, the green PPR pipe fittings also have the following main characteristics:

1. Non-toxic and hygienic. The raw material molecules of PPR are only carbon and hydrogen elements, and there are no harmful and toxic elements. It is hygienic and reliable. It is not only used for cold and hot water pipelines, but also for pure drinking water systems.

2. Heat preservation and energy saving. The thermal conductivity of PPR pipe is 0.21w/mk, which is only 1/200 of steel pipe.

3. Better heat resistance. The Vicat softening point of the PPR tube is 131.5°C. The maximum working temperature can reach 95℃, which can meet the requirements of the hot water system in the building water supply and drainage code.

4. Long service life. The service life of PPR tube can reach more than 50 years under the conditions of working temperature 70℃ and working pressure (P.N) 1.0MPa; service life can reach more than 100 years under normal temperature (20℃).

5. Easy installation and reliable connection. PPR has good welding performance. The pipes and fittings can be connected by hot melt and electrofusion. The installation is convenient and the joints are reliable. The strength of the connection part is greater than the strength of the pipe itself.

6. The materials can be recycled. PPR waste is cleaned and crushed and recycled for use in the production of pipes and fittings. Recycled material

Dosage does not exceed 10% of the total amount and does not affect product quality.


Send Inquiry