(1) The machine should be handled with care. When moving the compressor refrigerated water dispenser, it should be kept upright as much as possible. If it is to be tilted, the tilt should not be greater than 45 degrees, and it should be static for a period of time after transport. jobs.
(2) When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the dispenser. After adding a large bottle of water, turn on the hot water faucet, plug in the power supply and turn on the heating switch after the water flows out to avoid dry burning and prolong the life of the machine.
(3) If the water dispenser is not used for a long time, please turn off the machine switch and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please be careful of hot water burns during draining).
(4) It is best to disconnect the power when not in use at night to save energy and ensure safety when no one is using it.
(5) During the use of the machine, it is recommended to clean and disinfect the machine once every three months or so according to the specific situation. After one year of use, professional maintenance personnel can clean the smart seat and inner tank.
(6) The water dispenser should be placed in a ventilated place to prevent moisture, direct sunlight, and away from heating. The water dispenser should be about 15 cm away from the wall. The water dispenser should not be placed close to expensive furniture and other household appliances to avoid splashing and damaging items. The water dispenser must be placed steadily to prevent noise from the machine.
(7) It is forbidden to use organic solvents such as gasoline to clean the surface of the machine.
(8) If the power cord is found to be damaged, the water dispenser must be replaced with a special soft cord or contact the dealer. The machine must use a socket with a grounding device and a leakage protector to prevent the shell from being charged.
(9) Children should not play next to the water dispenser. If necessary, replace the hot water faucet with a safety faucet to prevent scalding children.
(10) Do not put metal rods into the back panel ventilation windows to avoid damage to the fan or cause electric shock; do not cover the fan ventilation windows to avoid damage to the semiconductor refrigeration components due to poor ventilation and poor heat dissipation, resulting in undesirable conditions.
(11) For drinking water dispensers that use compressors for cooling, when the cooling power supply is disconnected, it will take 3-5 minutes to start again, in order to extend the life of the machine.
(12) When pressing the faucet to receive water, don't use too much force to avoid falling out or damage to the rotating parts of the hand.
