Product Performance And Use Of HDPE Pipe

May 25, 2021

Leave a message

High-density polyethylene is non-toxic, tasteless, and odorless white particles with a melting point of about 130°C and a relative density of 0.941 to 0.960. It has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. Dielectric properties and environmental stress cracking resistance are also good.

The materials used in this processing method are generally crushed into powders, which are melted and flowed in a thermal cycle. Rotomolding uses two types of PE: general-purpose and cross-linkable. General-purpose MDPE/HDPE usually has a density ranging from 0.935 to 0.945g/CC, with a narrow MWD, which enables the product to have high impact and minimal warpage, and its melt index is generally in the range of 3-8. Higher MI grades are generally not suitable because they do not have the impact and environmental stress crack resistance expected of rotomolded products.

The thermoformed lining of many large picnic refrigerators is made of PE, which has toughness, light weight and durability. Other sheet and thermoformed products include mudguards, tank liners, pan guards, shipping boxes and tanks. A large number of fast-growing sheet applications are mulch or pond bottom villages, which are based on the toughness, chemical resistance and impermeability of MDPE.

High-performance rotational molding applications utilize the unique properties of its chemically cross-linkable grades. These grades have good fluidity in the first part of the molding cycle, and then crosslink to form their excellent environmental stress crack resistance and toughness. Wear resistance and weather resistance. Cross-linkable PE is only suitable for large containers, ranging from 500-gal tanks for transporting various chemicals to 20,000-gal agricultural tanks.

PE film processing generally uses ordinary blown film processing or flat extrusion processing. Most PE is used for film, general low-density PE (LDPE) or linear low-density PE (LLDPE) are available. HDPE film grades are generally used where superior stretchability and excellent impermeability are required. For example, HDPE film is often used for commodity bags, grocery bags and food packaging.


Send Inquiry