The density of PE gas pipe is a very important index of use. Generally, when purchasing the pipe, its density point will be investigated. Only pipes that meet the density requirements have excellent performance. Knowledge can only have a certain degree of understanding, so let's introduce its density point to you.
1. The main raw material of PE gas pipe, a few other comonomers, such as 1-butene, 1-hexene or 1-octene, are also often used to improve polymer performance. For HDPE, the content of the above few monomers is generally not More than 1%-2%.
2. The addition of comonomer slightly reduces the crystallinity of the polymer. This change is generally measured by density, which has a linear relationship with crystallinity.
3. The general classification of the United States is in accordance with ASTM D1248, and the density of HDPE is above 0.940g/.C. Medium-density polyethylene (MDPE) has a density range of 0.926~0.940g/CC. Other classification methods sometimes classify MDPE as HDPE or LLDPE.
4. Homopolymers have high density, high rigidity, good permeability and high melting point, but generally have poor resistance to environmental stress cracking (ESCR).
5. ESCR is the ability of PE gas pipe to resist cracking caused by mechanical or chemical stress.
(1) Higher density generally improves mechanical strength, such as tensile strength, stiffness, and hardness.
(2) Thermal properties such as softening point temperature and heat distortion temperature.
(3) Anti-permeability, such as air permeability or water vapor permeability.
